Need a Professional Installer?

Pyzique Bar-B-Que Installation Instructions

• Choose and level the desired area for your BBQ
• Set aside 28 stones that have a straight or concaved inside face to be used later
• Place 14 stones down to form a complete circle (Start with the stones separated to create a larger diameter. Then push them in towards the center to create a tight fit. A rubber mallet works well for this)
• Check to ensure that the first course is level
• Begin placing the next course (Be sure to offset the stones so you do not have a straight seam)
• For the sixth and seventh layer use the 28 stones that you previously set aside (This will ensure that the insert will fit properly)
• Place the sixth and seventh layers with the stones slightly separated to allow clearance for the BBQ insert

BE SURE THE STONES FORMING THE SEVENTH LAYER HAVE THE
SMOOTH SIDE FACING UP

• Lower the BBQ insert into position
• Push the sixth and seventh layers in to create a tight fit around the insert
• Back fill the BBQ with a suitable material (i.e. sand, rock, etc.) to the bottom of the insert