Molded from time worn, natural stone found in ledges and valleys of native
America, Cambridge Stone Veneer is offered in 3 distinctly different
Canyon Ledge retains all of the dimensional characteristics of
the handpicked pieces from which it was cast. The rustic look of Tuscan Fieldstone
is reminiscent of rural, old country cottages.
The stones vary in thickness from 1" to 2 1/2" and come in lengths from 8"
to 22" with heights from 1" to 8". Cambridge Stone
Veneer colors complement those available in Cambridge Pavingstones
with ArmorTec®. The weathered textures add rustic beauty to any
residential or commercial facade, gable and entrance way as well as
on pillars, in porticos, lanais and 4-season outdoor rooms, in addition
to custom fireplaces and much more. A comprehensive selection of
accessories such as small and large soldiers, a water table sill, shutter
block*, small and large keystones, matching fixture and receptacle plates
are available to complete the building of any project.
Choose From 2 Distinct Styles
Canyon Ledge | Chestnut
A warm mixture of earth tone tans and
browns with a hint of charcoal make
chestnut a very natural looking stone.
Chestnut is neutral enough to accent
almost any color home, and has a deep
and textured look to add a homey feel.
Chestnut tones are earthy and understated
yet add sophistication to any look.
Canyon Ledge | Santa Fe
Consisting of Indian Brown, Sandy Buff and
Charcoal, Santa Fe is the only stone color we
blend by hand to create a Southwestern feel.
Santa Fe adds warmth and character to
Canyon Ledge | Midnight Slate
Combinations of lighter and darker grays and
charcoal with hints of autumn leaves highlighting
this palette give midnight slate a three-dimensional
feel. The crisp and classic shades of gray found in
Midnight Slate exemplify the elegance only stone
can add to a home.
Canyon Ledge | Autumn Blend
A natural blending of forest green, canyon red,
autumn leaves and sandy buff brings out the season
of autumn blend. The combinations of these colors
allow a designer to complement and decorate for
that professional look. Autumn blend enhances
any environment or season.
Tuscan Fieldstone shown in Autumn Blend
Testing of our stone is performed in accordance with ICC AC51 by an accredited testing engineering firm. Specimens were tested for various properties in accordance with AC51 sections 4.2 through 4.7. Refer to
test result table below.
Avg. 2374 psi
Avg. 188,003 psi
Avg. 4.77 MPa
Shear Bond Strength
Avg. 92.74 psi
Freeze - Thaw
Avg. -0.74% weight loss
Canyon Stone products meet the requirements and conditions of acceptance for ICC ES AC51
"acceptance criteria for precast stone veneer", approved February 2008, Effective March 1,2008.
Canyon Stone warrants its veneer products for 50 years against manufacturing defects when
installed on buildings complying with local building codes and meeting manufacturers written
instructions. This warranty excludes deterioration caused from chemicals, paints, wall movement,
building settlement, and discoloration from oxidation and contaminates. Coverage is limited to the
original purchaser, does not include labor, and is limited to the repair or replacement of the product.
Our stones and accents are carefully stacked in framed wooden pallets yielding 120sf of flats. Pallets
are then wrapped with a weather resistant cardboard. Kraft paper layers every other row to minimize
scuffing of stones during transit. Smaller projects are packaged in Handy-Packs with 10sf of flats and
9 lf of corners.
Cast Stone Products Warranty:
Cambridge Pavers, Inc. warrants to the original purchaser (with a proof of purchase) that should the Cast Stone products (Steps, Caps, Ledgestone Cast Stone, or Cast Stone Slab 3 Pc. Design Kit) installed according to industry standards and in compliance with our installation guidelines, prove defective, it will be replaced without cost. Replacement labor is not included. This Warranty is good for as long as the original purchaser owns the real property on which the Cast Stone was installed. Cast Stone products meet or exceed ASTM C672. The use of de-icing salts (sodium chloride (NaCl)) will alter the surface texture of these products over time. Cambridge cannot guarantee the color match of any replacement units. Cast Stone products can not be compacted.